19
PICTURE SUB ADJ.
Configure the standard level of image adjustment.
Item
Content
Setting value
CONTRAST *
1
Adjust the standard level for the contrast adjusted with the CONTRAST knob on the
front panel.
– 20 – +20
BRIGHT *
1
Adjust the standard level for the brightness adjusted with the BRIGHT knob on the
front panel.
– 20 – +20
CHROMA *
1
Adjust the standard level for the chroma adjusted with the CHROMA knob on the
front panel.
– 20 – +20
PHASE *
1
,
*
2
Adjust the standard level for the phase adjusted with the PHASE knob on the front
panel.
– 20 – +20
NTSC SETUP
Select the set-up level of the input NTSC signal.
00 (compliant with 0% set-up
signal),7.5 (compliant with 7.5%
set-up signal)
COMPO. LEVEL
Select the level of the analog component signal (480i and 576i only).
B75 (compliant with BetacamVTR
7.5% set-up signal), B00 (compliant
with BetacamVTR 0% set-up signal),
SMPTE (compliant with M2VTR
signals)
sub menu
Display the sub menu which enables you to adjust the items in “PICTURE SUB ADJ.” while viewing the actual picture.
reset
Restore the default settings for all the items in “PICTURE SUB ADJ.” (You cannot select items to reset.)
*
1
Memorized for each input.
*
2
When “COMPONENT PHASE” is set to “DISABLE,” “PHASE” cannot be adjusted if no NTSC signal is input.
SIZE/POSI. ADJ.
Adjusts the size and position of the picture.
Item
Content
Setting value
H SIZE*
1
Adjust the horizontal picture size. Setting value varies depending on the signals.
Setting value varies
depending on the
signals.
H POSITION*
1
Adjust the horizontal picture position.
V SIZE*
1
Adjust the vertical picture size.
V POSITION*
1
Adjust the vertical picture position.
sub menu
Display the sub menu which enables you to adjust the items of “SIZE/POSI. ADJ.” while viewing the actual picture.
reset
Restore the default settings for all the items in “SIZE/POSI. ADJ.”
*
1
Memorized for each signal format.
WHITE BALANCE SET.
Selects the gamma correction value, color temperature and adjusts the drive level and cutoff point of each color (R/G/B).
Item
Content
Setting value
GAMMA
Select a gamma correction.
2.2 (equivalent to γ2.2), 2.35 (equivalent to γ2.35),
2.45 (equivalent to γ2.45), 2.6 (equivalent to γ2.6)
COLOR TEMP.
Select the color temperature.
9300K, 6500K, USER
R DRIVE
G DRIVE
B DRIVE *
1
Adjust the drive level of each color (red, green, and blue).
-255 – 000 (in 256 grades)
R CUT OFF
G CUT OFF
B CUT OFF *
1
Adjust the cutoff point of each color (red, green, and blue).
-228 – 000 + 227 (in 256 grades)
sub menu
Display the sub menu which enables you to adjust the items in “WHITE BALANCE SET.” while viewing the actual picture.
reset
Restore the default settings for the drive levels and cutoff points of the selected color temperature. (You cannot select
items to reset.)
*
1
Memorized for each color temperature
.
DTV21G11̲LCT2681.indb 19
DTV21G11̲LCT2681.indb 19
12.2.5 10:17:04 AM
12.2.5 10:17:04 AM
