JVC DT-F9L5, Instructions Manual

Page: 47 / 56

47 47
Specifications
General
Model name DT-V9L5 DT-F9L5
Type Multi format LCD monitor
Screen size Type 8.2 wide format
Aspect ratio 16:10
Compliant video signal format
☞
“Available signals” on page 49
Format HD SDI: SMPTE292M
SD SDI: ITU-R BT.656, SMPTE259M
EMBEDDED AUDIO 16CH: SMPTE299M, SMPTE272M
Audio output Internal speaker: 1.0 W None
Operating conditions
(Slightly variable depending on
ambient conditions for installation.)
Operating temperature: 5°C – 35°C
Operating humidity: 20% – 80% (non-condensing) Operating temperature: 0°C – 35°C with
Operating humidity: 20% – 80% (non-condensing) /
Operating temperature: 35°C – 40°C with
Operating humidity: 20% – 50% (non-condensing)
Power requirements AC 120 V / AC 220 V – 240 V, 50 Hz/60 Hz or DC 12 V – 17 V DC 12 V – 17 V
Rated current 0.5 A (AC 120 V)
0.25 A (AC 220 V– 240 V)
1.3 A (DC 12 V - 17 V) 1.3 A (DC 12 V - 17 V)
External dimensions
(excluding protruding parts) with the stand without the stand
Width: 217 mm Width: 217 mm 217 mm
Height: 218 mm Height: 176 mm 176 mm
Depth: 185 mm Depth: 116 mm 83.5 mm
Weight 3.2 k
g
(with the stand)
2.3 k
g
(without the stand)
1.7 k
g
Accessories AC power cord x 2, Power cord holder x 1, Screw x 2 (for
power cord holder), Protective filter x 1,
Screw (for protective filter) x 4 Protective filter x 1, Screw (for protective filter) x 4,
Tripod base x 1, Screw (for tripod base) x 4
LCD panel
Type 8.2˝ wide, active matrix TFT
Effective screen size Width: 176.4 mm
Height: 110.4 mm
Diagonal: 208.3 mm
Number of pixels displayed 1280 x 800
Number of colors displayed 16.70 million
Viewing angle (TYP.) 160° (Horizontally - Left: 80°, Right: 80°), 160° (Vertically - Upward: 80°, Downward: 80°)
Brightness (TYP.) 360 cd/m 2 450 cd/m 2
Contrast ratio (TYP.) 800:1
Input/output terminals
Video
VIDEO Input/output of composite signal: 1 line, BNC connector x 2, 1 V (p-p), 75 Ω
* The input (IN) and output (OUT) terminals are bridge-connected
(auto termination).
HDMI HDMI signal input (compatible with HDCP): HDMI connector x 1
COMPO.
(Y, Pb/B-Y, Pr/R-Y) Analog Component signal input: 1 Line, BNC connector x 3
Y: 1 V(p-p), 75 Ω(with sync)
PB/B-Y, PR/R-Y: 0.7 V (p-p), 75 Ω
E. AUDIO HD/SD SDI (IN 1) Digital signal input (compatible with EMBEDDED AUDIO signals):
auto detection, 2 line, BNC connector x 2
E. AUDIO HD/SD SDI (IN 2)
E. AUDIO HD/SD SDI
(SWITCHED OUT) Digital signal output (compatible with EMBEDDED AUDIO signals):
1 line switched out, BNC connector x 1
Audio
AUDIO (IN) Analog audio signal input: 1 line, RCA connector x 1, 500 mV (rms), high impedance
AUDIO (MONITOR OUT) Analog audio signal output: 2 line, RCA connector x 2, 500 mV (rms)
External
control
REMOTE (MAKE/TRIGGER)
☞
“Using the MAKE/TRIGGER system” on page 42
REMOTE (RS-232C)
☞
“Using the serial communication” on page 43
DT-F9L5̲EU.indb 47 DT-F9L5̲EU.indb 47 2012/12/18 14:13:09 2012/12/18 14:13:09