41
41
●
Setting of “Character Setting”
1
Change the input to one that you want to assign a video source name for.
2
Select “Character Setting”.
3
Press buttons to select the first character.
●
Each time you press button, the character changes as follows.
Press button to reverse the order.
Space
Character Setting
4
Press button to move the arrow to the next space.
●
The characters entered before moving the arrow are memorized.
5
Repeat
steps
3
and
4
(10 characters at maximum).
6
Press MENU button to store the name.
Character Setting
●
How to use the LCD Saver
1. Set reduced function to perform.
2. Set both time for starting the function and time for letting it work.
3. Activate the STANDBY MODE by Execute.
■
Aborting the ongoing LCD Saver
Operating this apparatus may lead to aborting the OPERATION MODE.
■
Stopping the operation
Executing “Cancel”. Turn off the power.
●
Once operating the function, unless turned off the power or executed “Cancel”, reduced function is automatically performed every 24 hours.
■
Example of setting up “1st Start” and “Work Time”
●
IMD (In-monitor Display)
This unit supports “TSL UMD Protocol – V4.0” from Television Systems Ltd.
16 character text display and one tally on each side can be controlled.
The color of both the text and the tally can be set.
Using the address setting, up to 127 units can be controlled individually.
To use, set the external control terminals of this unit to serial format.
For details of control commands, refer to the homepage of Television Systems Ltd.
●
Low Power Mode
Puts the unit into Low Power Mode 30 seconds after the monitor is switched off (standby) to further reduce power consumption.
•
Low Power Mode will not activate when “Remote Active On Standby” on the Set-up Menu is set to “On”.
•
The power lamp will be turned off during Low Power Mode.
Time to set in
the 1st Start
0h
2h
4h
6h
8h
10h
12h
14h
16h
18h
20h
22h
24h
Timing to run "Execute"
LCD Saver in
standby
LCD Saver in
operation
Time to set in
Work Time
CAM-01
Text display area
* Example of lower screen IMD display
Tally 2
Tally 1
LCD Saver in
standby
DT-F9L5̲EU.indb 41
DT-F9L5̲EU.indb 41
2012/12/18 14:13:08
2012/12/18 14:13:08
Summary of Contents for DT-F9L5
Page 53: ...53 53 MEMO DT F9L5 EU indb 53 DT F9L5 EU indb 53 2012 12 18 14 13 11 2012 12 18 14 13 11 ...
Page 54: ...54 54 MEMO cont DT F9L5 EU indb 54 DT F9L5 EU indb 54 2012 12 18 14 13 11 2012 12 18 14 13 11 ...
Page 55: ...55 55 DT F9L5 EU indb 55 DT F9L5 EU indb 55 2012 12 18 14 13 11 2012 12 18 14 13 11 ...
