JVC DT-F9L5, Instructions Manual

Page: 26 / 56

26 26
Attaching Option Parts (for DT-F9L5)
●
Do not rest your arm on the monitor or lean against the monitor.
●
Do not touch the LCD panel when installing the monitor.
Caution
Attaching the tripod base
You can select the attaching point according to your purpose—at the top or the bottom of the monitor.
Then you can attach the monitor to other devices by using the screw holes on the tripod base (1/4-20UNC or 3/8-16UNC).
CAUTION
●
Lay the monitor on a cloth with the LCD panel facing down to prevent the LCD panel from being damaged.
●
Fix the tripod base with the provided screws. Other screws may cause faulty installation or damage to the monitor.
Attaching to the bottom of the monitor Attaching to the top of the monitor
Detach the carry handle before attaching the tripod base(
1
), then fix
the tripod base with screws(
2
).
screw for tripod base
(provided)
screw for tripod base
(provided)
carry handle
tripod base
(provided)
tripod base
(provided)
1
2
Attaching the battery pack
Attach the external battery pack for the DC power supply.
●
Use an IDX V-Mount E-HL9S (ENDURA-HL9S) external battery.
CAUTION
●
Do not use the external battery for DC 24 V power supply.
Attach the battery pack Detaching the battery pack
Attach the battery by moving the battery in the direction of the arrow. Detach the battery by moving the battery in the direction of the
arrow by holding down the eject button.
battery eject button
Fix the tripod base with screws.
3/8-16UNC
1/4-20UNC
3/8-16UNC
1/4-20UNC
Reverse the above to attach the carry handle.
CAUTION
●
Be sure to install the monitor securely to prevent the monitor from
falling over, which may cause damage to the monitor or injury.
DT-F9L5̲EU.indb 26 DT-F9L5̲EU.indb 26 2012/12/18 14:13:02 2012/12/18 14:13:02