JVC DR-DX5SE, Instructions Manual

Page: 62 / 92

Filename [DX5SEU_12Editing.fm]
Masterpage:Left+
62
EN
EDITING
Page 62 Wednesday, 23 November 2005 14:13
You can use your unit as the source player or as the recording
deck.
1
Connect another recorder’s 21-pin SCART connector to the
unit’s 21-pin SCART connector as illustrated.
A
When using your unit as the source player:
^
connect its [L-1 IN/OUT] connector to the recording deck.
B
When using your unit as the recording deck:
^
connect its [L-2 IN/DECODER] connector to the source
player.
●
If another recorder is compatible with the Y/C signal:
^
when using your unit as the source player, set A L-1
OUTPUT B to A SCART S-VIDEO B . (
A
pg. 63)
^
when using your unit as the recording deck, set A L-2
SELECT B to A S-VIDEO B . (
A
pg. 63)
2
When using this unit as the recording deck, press DV/HDD/
DVD SELECT on the unit repeatedly to select the recording
deck.
3
When using this unit as the recording deck, press PR +/– to
select A L-2 B .
●
Set A L-2 SELECT B to A VIDEO B or A S-VIDEO B . (
A
pg. 63)
4
When using this unit as the recording deck, press REC MODE
repeatedly to set the recording mode. For DV deck, press
REC MODE on the remote control to set the recording mode.
5
Engage the Play mode of the source player.
6
Engage the Record mode of the recording deck.
7
Stop recording on the recording deck, then stop playback on the
source player.
NOTES:
●
All necessary cables can be obtained from your dealer.
●
For Y/C signal input/output, be sure to use a 21-pin SCART cable
that is compatible with the Y/C signal.
●
When you use this unit as the source player for editing, be sure to
set
A SUPERIMPOSE B to A OFF B before starting. (
A
pg. 73) If
you are using another recorder with S-Video and Audio output
connectors, connect its S-Video and Audio output connectors to
this unit’s [S-VIDEO] and [AUDIO] input connectors on the front
panel. Then, set the unit’s input mode to
A F-1 B in step 3 , and set
A F-1 INPUT B to A S-VIDEO B . (
A
pg. 64)
Edit To Or From Another Recorder
NOTES:
●
When using another recorder as the recording deck, refer to its
instruction manual.
●
It is not possible to dub copy-protected contents. An error
message will appear on the TV screen.
Player
Your unit
Another recorder
Recorder
TV
Player
Your unit
Another recorder
Recorder
A
When using your unit as the source player
B
When using your unit as the recording deck
TV
21-pin SCART cable
(supplied)
21-pin SCART cable
(not supplied)
21-pin SCART cable
(not supplied)
21-pin SCART
cable (supplied)
●
Slide the TV/CABLE/SAT/DVD switch to DVD .
DX5SEU_00.book Page 62 Wednesday, November 23, 2005 2:13 PM