Masterpage:Right0
Filename [DX5SEU_13Subsidiary.fm]
Page 71Wednesday, 23 November 2005 14:13
SUBSIDIARY SETTINGS
Various modes of this unit are categorized into menus nested in 2
levels shown in the following table. To change the settings of these
modes, find the desired mode in the menu (for details on each
menu, see pages 71 through 73), then follow the procedure below.
●
The procedure below shows how to set the desired option of the
mode as an example.
1
Press
so that the HDD or DVD lamp lights up on
the unit.
2
Press
to access the Main Menu screen.
3
Press
selection keys
to select
, then
press
4
Press
selection keys
to select
press
5
Press
selection keys
to select
, then press
.
6
Press
selection keys
to select
the desired option, then press
.
7
Press
* The
boldface
settings below indicate the settings at your purchase.
8
Set to the appropriate mode according to the type of the device
connected to [DIGITAL AUDIO OUT] connector.
:
Select this when you connect the digital input connector of a
Dolby Digital Decoder or an amplifier with a built-in Dolby Digital
Decoder.
:
Select this when you connect the digital input connector of an
amplifier with a built-in DTS, Dolby Digital, or MPEG
multichannel decoder.
Select this when you connect the linear PCM digital input of
other audio equipment (amplifier, MD or DAT deck, etc.).
●
This setting also functions when HDD is active.
●
If you watch or play back a title which contains multiple audio
languages, select
in advance and choose main or
sub audio with
.
8
Select the appropriate setting to accommodate the unit to the
connected A/V equipment. This function takes effect when a
DVD VIDEO disc is played back.
Select this when listening to conventional two-channel stereo
audio with the unit’s [AUDIO OUT] connectors connected to a
stereo amplifier/receiver or TV set, or in case you want to
record the audio from a DVD VIDEO disc to a Mini Disc, etc.
Select this when listening to multichannel surround audio with
the unit’s [AUDIO OUT] connectors connected to an amplifier/
receiver with a built-in surround decoder or a surround decoder.
8
/
The dynamic range (the difference between the loudest sound and
the quietest one) can be compressed during playback of a
programme encoded in Dolby Digital format.
This function takes effect when a DVD VIDEO disc recorded in
Dolby Digital format is played back at low or middle volume.
Normally select this setting to activate this function.
Select this to deactivate this function when you enjoy wide
dynamic range programme.
Select this when you hear the sound through the TV’s
speaker(s).
●
This function has no effect on programmes other than those
recorded in Dolby Digital format.
●
This function does not work when Simulated Surround Effect is
activated. (
●
The effect of
different depending on discs.
8
You can lower the output level of analogue audio to accommodate
the unit to the connected A/V equipment.
Normally select this setting.
The output level of analogue audio is lowered.
Mode Set
●
Turn on the unit.
●
Turn on the TV and select the AV mode.
●
Slide the
AUDIO OUTPUT (See right column)
PARENTAL LOCK (
FGDE
ENTER
AUDIO
SET UP
DVD
HDD
CABLE/SAT
DVD
TV
Selection Keys
ENTER
SELECT
SET UP
EXIT
DVD VIDEO SET UP
XP MODE REC AUDIO
HDD/DVD/DV SET UP
FUNCTION SET UP
INITIAL SET UP
REC/PLAY SET UP
DISPLAY SET
AUDIO REC
DIRECT REC
INPUT COLOUR SYSTEM
JUMP TIME
VIDEO IN/OUT
DOLBY DIGITAL
NICAM
OFF
PAL
15 MIN
SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
DX5SEU_00.book Page 71 Wednesday, November 23, 2005 2:13 PM