Masterpage:Right+
21
Filename [DX5SEU_05Name.fm]
INITIAL SETTINGS
Page 21
Wednesday, 23 November 2005 14:13
You can select the monitor type depending on the TV used when
you play back DVD VIDEO discs recorded for wide-screen TVs.
1
Press
so that the DVD lamp lights up on the unit.
2
Press
to access the Main Menu screen.
●
You cannot set the monitor type during recording or playback.
3
Press
selection keys
to select
press
4
Press
selection keys
to select
, then press
.
5
Press
selection keys
to select
, then press
.
6
Press
selection keys
to select
the desired option, then press
.
7
Press
* The
boldface
settings below indicate the settings at your purchase.
8
(Letter Box conversion):
Select this when the aspect ratio of your TV is 4:3 (conventional
TV). While viewing a wide screen picture, the black bars appear
on the top and the bottom of the screen.
(Pan&Scan):
Select this when the aspect ratio of your TV is 4:3 (conventional
TV). While viewing a wide screen picture, the black bars do not
appear; however, the left and right edges of the pictures will not
be shown on the screen.
(Wide television conversion):
Select this when the aspect ratio of your TV is 16:9 (wide TV).
(Wide television conversion):
Select this when the aspect ratio of your TV is fixed to 16:9
(wide TV). The unit automatically adjusts the screen width of
the output signal correctly when playing back a picture whose
aspect ratio is 4:3.
Pan&Scan/Letter Box
In general, DVD VIDEO disc are produced for a wide-screen TV
with 16:9 aspect ratio.
Material with this ratio will not fit to a TV with 4:3 aspect ratio.
There are two styles to display the image,
(PS) and
(LB).
Pan&Scan
The right and left side of the image are cut off.
The image fills the screen.
●
The picture will be shown in the
mode depending on the disc even if the
mode is selected.
Letter Box
Black bands appear at the top and bottom of
the image. The image itself appears in 16:9
aspect ratio.
Monitor Set
●
Turn on the unit.
●
Turn on the TV and select the AV mode.
●
Slide the
FGDE
ENTER
SET UP
DVD
CABLE/SAT
DVD
TV
Selection Keys
ENTER
SELECT
SET UP
EXIT
DVD VIDEO SET UP
MONITOR TYPE
HDD/DVD/DV SET UP
FUNCTION SET UP
INITIAL SET UP
REC/PLAY SET UP
DISPLAY SET
F-1 INPUT
L-1 OUTPUT
L-1 INPUT
L-2 SELECT
VIDEO IN/OUT
VIDEO
VIDEO
VIDEO
SCART VIDEO
4:3LB
SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
DX5SEU_00.book Page 21 Wednesday, November 23, 2005 2:13 PM