JVC DLA-VS2100, Instructions Manual

Page: 45 / 227

Operation
45
ENGLISH
Adjustments and settings in the menu (continued)
Color Management It is possible to set the color of the screen to the preferred color and save it.
To " [1-2-2] Color Management " of the submenu.
Clear Motion Drive It improves video images with fast movements to produce clear video images with little
residual image retention.
For PC signals, the "Clear motion Drive” cannot be set.
(*) If "Short Delay" is set to "On", "Mode 3" and "Mode 4" are not available.
Moreover, it may happen that the image is distorted in some scenes, or light and dark
flashes occur. In this case, please choose "Off", etc., and then a setting of your choice.
Settings: Off, Mode 1, Mode 2, Mode 3, Mode 4 [Off]
Off Off
Mode 1 Black insertion weak
Mode 2 Black interpolation strong
Mode 3 Interpolation weak
Mode 4 Interpolation strong
Lens Aperture Adjusts the amount with which the optical iris is squeezed. A setting of 0 means fully
opened.
Settings: (Dark) -15 to 0 (bright) [0]
Settings: (Dark) -3 to 0 (bright) [0]
Lamp Power It is possible to change the brightness of the lamp.
(*) If continually used with "High", the lamp will become dark earlier.
(*) The more one lets the interior temperature of the device rise due to generation of heat,
the less the level of tolerance against high temperatures.
(*) For about 60 seconds after the lamp is lit, the lamp cannot be switched off.
Settings: Normal, High [Normal]
Normal Normally this setting is chosen.(160W drive)
High In a bright room, when the video is hard to see, this setting is chosen.(220W drive)
[1-2-1] Sharpness
Sharpness Emphasizes the outlines of video images. Please adjust to your preference.
Values: 0 to 50 (clear)
Detail Enhance It makes minute details of the video images stand out. Please adjust to your preference.
Values: 0 to 50 (strong)
RS50 RS50 VSNL
RS50 RS50 VS21