JVC DLA-VS2100, Instructions Manual

Page: 17 / 227

17
Getting Started
ENGLISH
Controls and features (continued)
■
Remote Control
How to insert batteries into the remote control
●
If the remote control has to be brought closer to the projector to operate, it means that the batteries are
wearing out.
When this happens, replace the batteries. Insert the batteries according to the marks.
●
Be sure to insert the end fi rst.
●
If an error occurs when using the remote control, remove the batteries and wait for 5 minutes. Load the
batteries again and operate the remote control.
① ②
③
To turn on the power
To select input mode
(Reference page: 30)
To illuminate buttons on the remote
control for 7 second
To select or confirm
To return to the previous menu
(Reference page: 41)
To switch picture mode
Lens Aperture
Sequentially switched picture
adjust items, such as contrast and
brightness.The switching items are
not the same for different models, or
different picture modes.
To set gamma
To adjust color temperature
To display/close the menu
(Reference page: 41)
To hide the image
temporarily(Reference
page: 34)
Clear Motion Drive
To turn off the power
Auto Alignment
(Reference page: 48)
BACK
HIDE
LIGHT
C.M.D
PC
HDMI 1
STAND BY
ASPECT
HDMI 2
ANAMO
COMP.
LENS.
CONTROL
MENU
GAMMA
AP
LENS.
ADJ.
PIC.
ON
NATURAL 3D
USER4 USER5 USER6
PICTURE MODE
COMPONENT
TEMP
COLOR
AUTO
ALIGNMENT
DYNAMIC
USER1
USER2
USER3
To set the screen size
(Reference page: 32)
To control lens
(Reference page: 30)
RS50 RS50 VS21