JVC DLA-M2000LE Operating Instructions Manual Download Page 21

Page: 21 / 40

No.51781

1-21

DLA-M2000LU

DLA-M2000LE

Basic Operations

■

Projector’s buttons

■

Remote control unit

■

Language display

The display languages of the menus, direct buttons
(DIGITAL ZOOM, KEYSTONE, VOLUME, etc) and
messages is set to “ENGLISH” when the projector is bought.
The display language can be selected from the following 6
languages: “

(Japanese)”, “English (English)”,

“Deutsch (German)”, “Español (Spanish)”, “Italiano (Italian)”
and “Français (French)”. (Refer to page 45.) However, some
words (VIDEO, NTSC, Quick Alignment, etc) are only
displayed in English.

2. Select the Input source to be Projected

Press the VIDEO button or the PC button to switch the
input.
• Each time you press either button, the selected input

changes as follows. The selected name appears on the top
right of the image on the screen for five seconds. (Called
line display.)

When you press the VIDEO button:

Y/C

↔

VIDEO

When you press the PC button:

PC1

↔

PC2

[Screen display]

* To show the line display (Y/C, VIDEO, PC1, or PC2) or not

is selectable by the menu. Refer to “Setting and Adjusting
Other Functions (OPTIONS)” on page 52.

Notes

• When the AV IN (Y/C or VIDEO input) terminal input signal

source is switched with the VIDEO button, it is necessary to
reconnect the audio cable to the active device since the
projector has only a single AUDIO input terminal.

• When the PC1 or PC2 input terminal signal source is

switched with the PC button, it is necessary to reconnect
the audio cable to the active device since the projector has
only a single PC AUDIO input terminal.

• When no image signal is input to the selected input

terminal, the message “No image signal is inputted.” is
displayed on the screen. (Refer to page 64.)

• When the PC2 input terminal is used, “PC2 (BNC)” must be

selected from the menu options. (Refer to page 52.)

3. Adjust the Screen Size (Zooming)

How to adjust the projected screen size differs depending on
the lens unit (optional) you are using.

GL-M2910G (without zooming function):

The projected screen size cannot be changed.

GL-M2915SG/GL-M2920ZG/GL-M2930SZG (with
zooming function):

Adjust the projected screen size with the following buttons on
the remote control unit.

LAMP

TEMP

STAND BY

HIDE

VIDEO

MENU

KEYSTONE

VOLUME

PRESET

ESCAPE

ENTER

OPERATE

PC button

VIDEO button

FOCUS

–

ZOOM

SHIFT

VOLUME

–

QUICK

ALIGN.

SHUTTER

–

PRESET

ESCAPE

DIGITAL

ZOOM

KEYSTONE

–

VIC SELECT

VIDEO

PC button
VIDEO button

ZOOM button

VIDEO

Remote control unit

Projector

VIDEO

Q U I C K A L I G N M E N T

PC 1

PC 2

Y/C

VIDEO

Line Display

Basic Operations

ENGLISH

DEUTSH

FRAN

AIS

ITALIANO

ESPA

■

Projector’s buttons

■

Remote control unit

Note

• The function of GL-M2915SG is to adjust the view angle

zooming by 2%. (For fine view angle adjustment)

To enlarge the projected screen size

Press the ZOOM W (Wide) button.

To reduce the screen size

Press the ZOOM T (Tele) button.

4. Adjust Focus

Adjust focus with the following buttons on the remote control
unit.

To focus on farther points

Press the FOCUS + button.

To focus on nearer points

Press the FOCUS – button.

5. Adjusting Sound Volume

Adjust sound volume with the /– buttons. When
the or – button is pressed, “Audio-Vol” appears
on the screen together with the level bar and set value (0 to
50). When “15 sec.” is displayed in the menu, “Audio-Vol” will
appear in approximately 15 seconds.

When you press the button:

The sound volume becomes higher. (0

→

50)

When you press the VOLUME – button:

The sound volume becomes lower. (50

→

* When the volume is set to 0, no sound will be heard from

the built-in speaker.

Notes

• When “Audio-Vol” is displayed on the screen, pressing the

PRESET button resets the set value to “0”.