1-26 (No.MB399)
4.1.3 DVD test mode
6. DVD initialize
DVD module initialized.
LCD segment is light on at initialize command.
DVD initialize is completed.
Press the [3D PHONIC]
button on the main unit.
5. DVD test mode
In to the DVD test mode.
Test mode contents is refer to module specification.
DVD test mode is canceled by POWER OFF and
except source DVD.
Insert a power cord in an outlet while pressing
the [PLAY] and [PAUSE] buttons on the main
unit simultaneously.
This unit is set to DVD test mode.
The details refer to "4.1.3 DVD test mode".
DVD test mode.
T xxy vw
Initialization state from DVD UNIT
Study state information from DVD UNIT
Region number
Received DESTINATION information:
JC/1U/D/E/2U/3U/UB/UT/4U/UY/EE/UF
1. To enter DVD TEST mode,
(1) AC POWER ON while holding PLAY+PAUSE keys.
(2) DVD Mecha will start in TEST MODE, FL will display:
2. To exit DVD TEST mode,
During TEST MODE (except for Device Key write & DVD Region Re-write), press POWER KEY.
To exit TEST mode for Device Key Write & DVD Region Re-write, first AC OFF, then AC ON again to return to
normal state.
3. EEPROM INITIALIZATION
3.1 NORMAL INITIALIZE
(1) During DVD TEST MODE, press STOP key on remote control to start NORMAL EEPROM INITIALIZATION.
(2) FL will display:
3.2 FULL INITIALIZE
(1) During DVD TEST MODE, press >>| key on set 2 seconds control to start FULL EEPROM INITIALIZATION.
(2) FL will display:
T xxy vw
Initialization state from DVD UNIT
T xxy vw
Initialization state from DVD UNIT
4. DEVICE KEY CHECKSUM DISPLAY
(1) During DESTINATION INFO display screen (1), press MENU key to enter DEVICE KEY CHECKSUM display.
(2) FL will display:
DKxxxx (Example) DK470B
