No. 51955
AV42PD20ES
5
SAFETY PRECAUTIONS
1. The design of this product c ontains special hardware and many
circuits and components specially for safety purposes. For
continued protection, no changes should be made to the original
design unless authorized in writing by the manufacturer.
Replacement parts must be identic al to thos e used in the original
circuits. Servic e should be performed by qualified personnel
only.
2. Alterations of the design or circ uitry of the product should not be
made. Any design alterations or additions will void the
manufacturer's warranty and will further relieve the manufacturer
of responsibility for personal injury or property damage resulting
therefrom.
3. Many electrical and mechanical parts in the product have special
safety-related characteristics. Thes e characteristics are often not
evident from visual inspection nor c an the protection afforded by
them necess ary be obtained by using replac ement c omponents
rated for wattage, etc . Replacement parts which have these
special safety characteristics are identified in the Parts List of
Service Manual. Electrical c omponents having such features are
identified by shading on the schematics and by (
!
) on the Parts
List in the Service Manual. The us e of a substitute replacement
which does not hav e the same safety characteristics as the
recommended replacement part s hown in the Parts List of
Service Manual may c aus e shock, fire, or other haz ards.
4. The leads in the products are routed and dressed with ties,
clamps, tubing’s, barriers and the like to be s eparated from live
parts, high temperature parts, moving parts and / or sharp edges
for the prevention of electric shock and fire hazard. When
service is required, the original lead routing and dress should be
observed, and it should be confirmed that they have been
returned to normal, after re-assembling.
WARNING
1. The equipment has been designed and manufactured to meet
international safety standards.
2. It is the legal responsibility of the repairer to ensure that thes e
safety standards are maintained.
3. Repairs must be made in accordanc e with the relevant safety
standards.
4. It is essential that s afety critical c omponents are replaced by
approved parts.
5. If mains voltage s elector is provided, check setting for local
voltage.
[UK MODEL]
