background image

7

ENGLISH

AUTO WHITE

SET

IN

OUT

ON

FAR

NEAR

BRIGHTER

DARKER

AUTO

AUTO

A5

A4/LETTER

BRIGHTNESS

FOCUS

ZOOM PRESET

ZOOM

OFF

FREEZE

Use to adjust the brightness of a 
camera picture.
AUTO:

Press this button to 
automatically adjust 
the brightness. The 
indicator blinks.
When brightness 
adjustment is 
complete, this 
indicator goes out.

DARKER:

Press to make the 
picture darker.

BRIGHTER: Press to make the 

picture brighter.

BRIGHTNESS

Use to adjust the white balance of 
a camera picture automatically.
Shoot a white paper in full screen, 
adjust the brightness and then 
press the button. The indicator 
blinks and the white balance is set 
automatically. When adjustment is 
complete, the indicator goes out.

• When lighting in the surround-

ings changes, adjust the white 
balance again.

AUTO WHITE SET

Use to set a camera picture size to 
A4 or A5 at the touch of a button.
A4/LETTER: Press to show A4 

landscape-oriented 
material in full screen 
view.

A5:

Press to show A5 
landscape-oriented 
material or the upper 
or lower half of A4 
portrait-oriented ma-
terial in full screen 
view.

ZOOM PRESET

Use to switch the camera or 
picture between live action still 
images.
OFF: Press to show the camera 

picture as a live action im-
age.

ON: Press to show the camera 

picture as a still image.
Use this function when 
changing material for a 
smoother presentation.

FREEZE

Use to increase or decrease 
the size of an object shot 
output by the camera.
OUT: Press to show all of or 

most of an object.

IN:

Press to enlarge a specif-
ic part of an object.

• When the digital zoom is set 

to x2 or x4, the picture may 
shake a little while the magni-
fication value is being 
changed.

ZOOM

Note on focus operation

Under the following conditions, it may not be 
possible to obtain proper focus with the 
AUTO button. In this case, adjust the focus 
with the FAR or NEAR button.

• Object with low contrast
• Shiny object
• Dark screen 
• Horizontal stripes
• Lattice pattern 
• Moving object
• Object not located at the center of the screen
• 3-dimensional object

You can perform the same operations using a remote control unit (see the Remote control unit section on page 11).

Summary of Contents for AV-P950E




















Reviews: