– 32 –
4
Adjust the volume level of the unit to your desired
listening level.
5
Apply sound effects, if you wish.
• For how to apply sound effects, see page 14.
Adjusting the Audio Input Level
If the sound from the component connected to the
AUX/DVD jacks is too loud or is not loud enough when
changing from another source to “AUX” (without changing
the volume level), you can change the audio input level
through the AUX/DVD jacks.
1
Press FM/AM/AUX (or AUX/DVD on the main unit)
repeatedly so that “AUX” appears in the main
display.
On the remote control:
• Each time you press the button, the source changes as
follows:
2
Press and hold SET on the remote control for more
than 2 seconds.
• Each time you press and hold the button, the audio
input level alternates between “LEVEL 1” and
“LEVEL 2.”
“
LEVEL 1
”
:
Select this when the sound is too loud
(initial setting).
“
LEVEL 2
”
:
Select this when the sound is not loud
enough.
To change the information shown in the main display
On the remote control ONLY:
Each time you press DISP/CHARA, the information in the
main display alternates between the source indication and
the clock indication.
• If an MD is inserted, the MD remaining recording time
(“REC REMAIN”) is shown before the clock indication.
Listening to External Equipment
You can listen to external equipment connected to the
AUX/DVD jacks on the rear of the unit.
• First make sure that the external equipment is properly
connected as follows:
DO NOT connect other equipment while the power
is on.
1
Press FM/AM/AUX (or AUX/DVD on the main unit)
repeatedly so that “AUX” appears in the main
display.
On the remote control:
• Each time you press the button, the source changes as
follows:
2
Adjust the volume level of the unit to “VOLUME 0.”
3
Start playing the external equipment.
• For operation of the external equipment, see the
manuals supplied with it.
FM
AM
AUX
R
L
R
L
SPEAKER IMPEDANCE 4~16
Ω
SPEAKERS
CAUTION:
External equipment
To AUX/DVD jacks
R
Right
Left
L
FM
AM
AUX
EN29-32UX-Z7MD[A]f
02.7.31, 21:25
32
