Making Masking Tape Targets
1. Tear or cut two pieces of masking tape. The first piece
should be about one and a half times the width of the
tape, the second should be about three times the
width of the tape.
2. Stick the two pieces of tape together in a cross such
that the sticky sides face one another.
3. Fold over the protruding sides of the longer piece of
tape. The centre portion of the target should not be
sticky on either side - the two tabs should be sticky on
one side.
Summary of Contents for Blacknose A3
