Just Add Sharks Blacknose A3, User Manual

Page: 17 / 50

1. Attach the 100mm
⌀
extraction vent adapter to the extraction port on
the left side of the machine with the hex bolts
2. Fit one end of the first piece of 100mm
⌀
blue extraction hose to the
vent adapter, securing it with a hose clamp
3. Fit the other end of the first piece of extraction hose to the intake port of
the extractor fan, securing it with a hose clip
4. Fit one end of the second piece of extraction hose to the outlet port of
the extractor fan, securing it with a hose clip
5. Insert the other end of the second piece of extraction hose into the
extractor vent
Notes about extractor vents
Some factors which may be considered when choosing the location of an
extractor vent:
• Is the vent near a window / ventilation inlet? (fumes may blow back)
• The vent should probably be above head height, but not too close to the
eaves
• The vent should not expel fumes into another work area / adjacent
building
Alignment
Before the laser is used for the first time, the alignment should be checked.
See
​
Laser Alignment
​
for details.