Jura IMPRESSA Z5, Manual

Page: 68 / 112

68
7 Maintenance
Each time milk has been prepared the IMPRESSA displays a prompt
for cappuccino rinsing.
It can be set in programming mode whether the rinsing prompt is
displayed immediately or 10 minutes after preparation (refer to
Chapter 6 ‘Permanent settings in programming mode – Rinses’).
Precondition :
COFFEE READY
/
CAPPU. RINSING
is
shown on the display, the maintenance button
c
lights up.
Place a receptacle under the cappuccino nozzle.
Turn the selection lever of the nozzle to the steam posi-
tion
n
.
c T
Press the maintenance button.
CAPPUCCINO RINSING
, the cappuccino nozzle is
rinsed.
Preparation stops automatically.
COFFEE READY
appears on the display.
To ensure that the cappuccino nozzle works perfectly, you should
clean it daily when you have been preparing milk.
If the wrong cleaning agent is used, the machine could be damaged
and/or traces of detergent could be left behind in the water.
Use only original JURA care products.
The IMPRESSA will not prompt you to clean the cappuccino
nozzle.
The JURA Auto-Cappuccino Cleaner is available from stock-
ists.
You can also try out the ‘Cleaning the cappuccino nozzle’
operation online. Visit the Knowledge Builder at
www.jura.com.
T
T
T
E
E
@
Rinsing the
cappuccino nozzle Rinsing the
cappuccino nozzle
Rinsing the cappuccino
nozzle after prompt
Rinsing the cappuccino
nozzle after prompt
Cleaning the
cappuccino nozzle Cleaning the
cappuccino nozzle
CAUTION CAUTION