Jura IMPRESSA Z5, Manual

Page: 28 / 112

28
3 Familiarising yourself with the control options
Example : Proceed as follows to prepare a strong cup of coffee.
Precondition :
COFFEE READY
is shown on the display.
Place a cup under the coffee spout.
g T
Turn the Rotary Switch until
STRONG
appears on the dis-
play.
o T
Press the Coffee button for as long as
STRONG
is dis-
played.
1 COFFEE
/
STRONG
.
The pre-set amount of water flows into the cup. Preparation
stops automatically.
COFFEE READY
appears on the
display.
Example : Proceed as follows to prepare a
110 ML
cup of coffee.
Precondition :
COFFEE READY
is shown on the display.
Place a cup under the coffee spout.
o T
Press the Coffee button.
The grinding operation starts.
1 COFFEE
appears on the
display, and then the strength is shown.
g T
Turn the Rotary Switch during the brewing operation until
110 ML
is displayed.
The set amount of water flows into the cup. Preparation
stops automatically.
COFFEE READY
appears on the
display.
It is easy to make permanent settings for the amount of water for all
coffee and milk specialities as well as hot water according to the cup
size. As in the following example, adjust the amount of water once.
Every time you prepare a drink in the future, this amount of water
will be dispensed.
The permanent settings for adapting the amount of water to to the
cup size for all coffee and milk specialities as well as hot water follow
this model.
Example : To enter permanent settings for the amount of water for
a ristretto, proceed as follows:
Precondition :
COFFEE READY
is shown on the display.
Place an espresso cup under the coffee spout.
T
T
T
Changing the coffee
strength before preparation
Changing the coffee
strength before preparation
Changing the amount of
water during preparation
Changing the amount of
water during preparation
Entering a permanent
setting for the amount
of water for a cup size Entering a permanent
setting for the amount
of water for a cup size