Jura IMPRESSA J9 One Touch, Instructions For Use Manual

Page: 26 / 52

26
4 Permanent settings in programming mode
Product Temperature Coffee strength Amount
Latte
macchiato,
cappuccino ‘Normal’ , ‘High’
(approx. 176–205 °F (80–96 °C))
‘extra-mild
;
’ ,
‘mild
;;
’ ,
‘normal
;;;
’ ,
‘strong
;;;;
’ ,
‘extra-strong
;;;;;
’
Amount of milk:
‘3 sec.’ – ‘120 sec.’
Interval: ‘0 sec.’ – ‘60 sec.’
Volume: ‘0.5 oz’ – ‘8.0 oz’
(25 ml – 240 ml)
Milk portion – max. 149 °F (65 °C) – ‘3 sec.’ – ‘120 sec.’
Hot water ‘Low’ , ‘Normal’ , ‘X high’
(approx. 149–203 °F (65–95 °C))
– ‘0.5 oz’ – ‘15.0 oz’
(25 ml – 450 ml)
Example: Proceed as follows to change the amount of milk for a
latte macchiato from ‘16 sec.’ to ‘20 sec.’ , the interval from ‘30 sec.’
to ‘40 sec.’ and the amount of water from ‘1.5 oz’ (45 ml) to ‘1.0 oz’
(40 ml).
Precondition:
‘Please select product:’ is displayed.
O T
Press the P button.
‘Maintenance status (1/6)’
g T
Turn the Rotary Switch until the program item ‘Product set-
tings (2/6)’ is displayed.
T
Press the ‘Expert mode’ button.
‘Expert mode’
E
Next select the button of the product for which you would like
to make settings. No product is prepared at this point.
T
Press the ‘Latte macchiato’ button.
‘Latte macchiato’
T
Press the ‘Amount of milk’ button.
T
Press the ‘ < ’ or ‘ > ’ button to change setting for the amount
of milk to ‘20 sec.’ .
T
Press the ‘Save’ button.
‘Saved’ appears briefly on the display.
T
Press the ‘Volume’ button.
T
Press the ‘ < ’ or ‘ > ’ button to change setting for the fill vol-
ume to ‘1.0 oz’ (40 ml).
T
Press the ‘Save’ button.
‘Saved’ appears briefly on the display.
T
Press the ‘Next’ button.
T
Press the ‘Interval’ button.