Jura IMPRESSA J9 One Touch, Instructions For Use Manual

Page: 24 / 52

24
4 Permanent settings in programming mode
4 Permanent settings in programming mode
Hot coffee, hot steam and hot water can cause scalding. Scalding is
a serious burn.
T
Use extreme care when handling hot liquid or steam.
T
Allow liquid to cool down before drinking.
T
In the event of scalding, rinse affected area with cold water an
seek medical attention.
T
Keep children AWAY.
For a summary of the different temperatures, please refer to Chap-
ter 4 ‘Permanent settings in programming mode – Product settings.
Press the P button to enter programming mode. You can navigate
through the program items and permanently save the required set-
tings simply by turning the Rotary Switch and using the variable
buttons. The following settings can be made:
Program item Sub-item Explanation
‘Maintenance status
(1/6)’ ‘Clean’ ,
‘Descale’ (only if filter is
not activated),
‘Change the filter’ (only if
filter is activated),
‘Rinse the coffee system’ ,
‘Clean the milk system’
T
Start the required maintenance program
here.
‘Product settings (2/6)’ ‘Expert mode’
T
Select your settings for specialty coffees
and hot water.
‘Maintenance settings
(3/6)’ ‘Filter’ ,
‘Water hardness’ (only if
filter is not activated),
‘Rinse the coffee system’ ,
‘Rinse the milk system’
T
Indicate whether you are operating your
IMPRESSA with or without a CLEARYL
Blue filter cartridge.
T
Adjust the water hardness.
T
Change the settings for the switch-on
rinse and milk system rinse.
J
WARNING