Jura IMPRESSA F8, Instructions For Use Manual

Page: 34 / 56

34
4 Permanent settings in programming mode
In the program item ‘Machine settings’ ( ‘5/7’ ) / ‘Units’ you can select
the unit used for the amount of water.
Example:
Proceed as follows to change the unit for the amount of
water from ‘ml’ to ‘oz’ .
Precondition: ‘Please select product’ is displayed.
O T Press the P button.
‘Maintenance status’ ( ‘1/7’ )
g T Turn the Rotary Switch until ‘Machine settings’ ( ‘5/7’ ) is
displayed.
T Press the ‘Units’ button.
‘Units’
T Press the ‘oz’ button.
T Press the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘Machine settings’
O T
Press the P button to exit programming mode.
‘Please select product’
In the program item ‘Machine settings’ ( ‘4/7’ ) / ‘Factory setting’ the
machine can be reset to its factory setting: All user settings (apart
from the ‘filter’ and ‘water hardness’) are reset to factory settings.
Your IMPRESSA then switches off.
Precondition: ‘Please select product’ is displayed.
O T Press the P button.
‘Maintenance status’ ( ‘1/7’ )
g T Turn the Rotary Switch until ‘Machine settings’ ( ‘4/7’ ) is
displayed.
T Press the ‘Factory setting’ button.
‘Factory setting’ / ‘Reset the machine to the factory
settings?’
T Press the ‘Yes’ button.
‘Saved’ appears briefly on the display.
Your IMPRESSA is switched off.
In this program item you can set the language used by your
IMPRESSA.
Unit for amount of water
Restore factory settings
Language