20
2 Preparation
E
This chapter applies to the
professional fine foam frother
and
the
fine foam frother.
E
With the professional fine foam frother, available as an
optional accessory, you can also prepare hot milk.
Example:
Proceed as follows to prepare milk foam.
Precondition:
‘Please select product’
is displayed.
T
Place a cup under the fine foam frother (figure: Optional
JURA Cool Control Basic 20 oz (0.6 l)).
E
Ensure that the filling height of the milk is
no higher
than the
milk pipe connection on the fine foam frother.
E
If you are using the
professional fine foam frother,
turn the
selector switch to the Milk Foam position
é
.
g
T
Turn the Rotary Switch to view the product selector.
g
T
Turn the Rotary Switch until the
‘Portion milk foam’
product
is in focus.
k
T
Press the Rotary Switch to start preparation.
‘Portion milk foam’
As soon as the machine has heated up,
‘Switch open’
appears.
l
T
Turn the switch to the
m
position.
‘Portion milk foam’
appears and the milk foam is prepared.
Preparation stops automatically when the preset amount of
steam is reached.
‘Switch close’
y
T
Turn the switch to the
°
position.
‘Please select product’
appears on the display.
E
You can continue to prepare steam for the next 40 seconds or
so without the machine having to heat up again.
To ensure that the fine foam frother always works properly, you
must clean it
daily
when you have been preparing milk (see Chap-
ter 5 ‘Maintenance – Cleaning the fine foam frother’). Your IMPRESSA
will
not
prompt you to clean the fine foam frother.
Milk foam
