manualshive.com logo in svg

Jura IMPRESSA F8, Instructions For Use Manual, Page: 3 / 56

Share
Download
Jura IMPRESSA F8 Instructions For Use Manual Download Page 3

3

Table of contents

Cleaning the fine foam frother ................................................................................................................. 37
Dismantling and rinsing the fine foam frother......................................................................................39
Inserting and activating the filter .............................................................................................................40
Changing the filter .......................................................................................................................................41
Cleaning the machine ................................................................................................................................42
Descaling the machine  ..............................................................................................................................44
Cleaning the bean container .....................................................................................................................46
Descaling the water tank ...........................................................................................................................46

6 Display 

messages 

47

7 Troubleshooting 

48

8  Transport and environmentally friendly disposal 

50

Transport / Emptying the system .............................................................................................................50
Disposal .........................................................................................................................................................50

9 Technical 

data 

51

10 Index 

52

11  JURA contact details / Legal information 

56

Symbol description 

Warnings

This is the safety alert symbol. lt is used to alert you to potential personal injury 
hazards. Obey all safety messages that follow this symbol to avoid possible injury 
or death.
DANGER indicates a hazardous situation which, if not avoided, will result in death 
or serious injury.
WARNING indicates a hazardous situation which, if not avoided, could result in 
death or serious injury.

 J 

CAUTION

CAUTION, used with the safety alert symbol, indicates a hazardous situation 
which, if not avoided, could result in minor or moderate injury.

 NOTICE

NOTICE is used to address practices not related to personal injury.

Symbols used

T

Prompt to take action.

 This symbol means that you are being prompted to 

perform some action.

E

Information

 and tips to make it even easier to use your IMPRESSA.

‘Coffee’

Display message

J

 J

 

DANGER

 J

 

WARNING

Summary of Contents for IMPRESSA F8

























































Reviews:

No comments