background image

6

IMPORTANT SAFEGUARDS

This appliance is for household use. Any servicing other than cleaning 
and user maintenance shall be performed by an authorized service  
representative:

 

U

Do not immerse base in water or try to disassemble.

 

U

Do not put the appliance or any individual parts in the dishwasher.

 

U

Check voltage to be sure that the voltage indicated on the name 
plate complies with your voltage. The name plate is located on the 
underside of the appliance.

 

U

Never use warm or hot water to fill the water container. Use cold 
water only.

 

U

Keep your hands and the cord away from hot parts of the  
appliance during operation.

 

U

Never clean with scouring powders or hard implements.

 

U

Ensure that the ventilation slots are not covered.

 

U

Never pull out the drip tray during the brewing process. Only pull 
the drip tray when the display instructs you or when the appliance 
is ready for use.

 

U

Never fill instant coffee, chocolate mix etc. into the bean container 
or ground coffee funnel (filler funnel for ground coffee). It will 
damage the functioning of the brewing chamber.

 

U

Never fill sugar coated coffee beans into the bean container. In 
case of doubt, call your dealer.

 

U

Never fill anything other than coffee beans into the bean  
container (no chocolate, no rice, no nuts, no spices, nothing other 
than roasted coffee beans).

 

U

Never fill frozen beans into the bean container. If you store beans 
in the freezer, let them thaw 3 to 4 hours before filling them into 
the bean container.

 

U

Never fill anything but fresh, cold and clean water into the water 
tank, except when decalcifying.

 

U

Never use mineral or carbonated water. You can use tap water, 
bottled water, spring water and reverse osmosis water.

 

U

Never do anything with the machine which is not described in 
these instructions. In case of doubt, call your dealer.

J

 CAUTION

NOTICE

NEVER DO 

(or you will void your 

warranty protection):

Summary of Contents for ENA 8



































Reviews: