19
4 Permanent settings in programming mode
es
fr
en
it
fr
pt
en
Product
Coffee strength Amount
More settings
Hot water
–
Water: 0.5 oz – 15 oz
(25 ml – 450 ml)
Temperature (low,
normal, high)
Permanent settings in programming mode always
follow the same model.
Example:
Proceed as follows to change the
coffee
strength
for one coffee.
Precondition:
The start screen is displayed.
T
Press the
‘Coffee’
button for
approximately
2 seconds
until the list of possible settings
appears.
‘Coffee’
T
Press the
‘Coffee strength’
button.
‘Coffee strength’
T
Press the
‘ < ’
or
‘ > ’
button to change the
setting for the coffee strength.
T
Press the
‘Save’
button.
‘Saved’
appears briefly on the display.
‘Coffee’
T
Press the
‘Back’
button to return to the start
screen.
Automatic switch-off
By instructing your ENA to automatically switch
itself off, you can cut down your energy
consumption. If this function is activated, your ENA
switches off automatically after the preset time
following the last action on the machine.
You can set the automatic switch-off to 15 minutes,
30 minutes or 1-9 hours.
Precondition:
The start screen is displayed.
T
Press the
‘ P ’
button for
approximately
2 seconds
to enter programming mode.
T
Press the
‘
’
button.
T
Press the
‘Machine settings’
button.
T
Press the
‘Switch off after’
button.
‘Switch off after’
T
Press the
‘ < ’
or
‘ > ’
button to change the
setting.
T
Press the
‘Save’
button.
‘Saved’
appears briefly on the display.
‘Machine settings’
T
Press the
‘Back’
button for
approximately
2 seconds
to return to the start screen.
Energy-saving mode
In the program item
‘Machine settings’
/
‘Save
energy’
you can set an energy-saving mode:
U
‘Save energy’
/
‘Active’
U
Soon after the last preparation, the ENA
stops heating up.
U
Before you can prepare a coffee specialty,
coffee specialty with milk, or hot water, the
machine must heat up.
U
‘Save energy’
/
‘Inactive’
U
All coffee specialties, coffee specialties with
milk and hot water can be prepared without
having to wait.
Example:
Proceed as follows to deactivate the
energy-saving mode.
Precondition:
The start screen is displayed.
T
Press the
‘ P ’
button for
approximately
2 seconds
to enter programming mode.
T
Press the
‘
’
button.
T
Press the
‘Machine settings’
button.
T
Press the
‘Save energy’
button.
‘Save energy’
T
Press the
‘Inactive’
button.
T
Press the
‘Save’
button.
‘Saved’
appears briefly on the display.
‘Machine settings’
T
Press the
‘Back’
button for
approximately
2 seconds
to return to the start screen.
Restore factory settings
In the program item
‘Machine settings’
/
‘Factory
setting’
the machine can be reset to its factory
setting.
