22
5 Maintenance
J
WARNING
Harmful and irritating cleaning agent. Harmful if
swallowed. Irritating to eyes and skin.
T
Keep children AWAY.
T
Avoid contact with skin and eyes.
T
After contact with skin, wash immediately
with plenty of water. In case of skin irritation,
seek medical advice.
T
After eye contact, immediately flush eyes
with plenty of water and seek medical
advice.
T
If swallowed, rinse mouth immediately and
drink large quantities of water. Do not
induce vomiting. Seek medical advice
immediately and show label.
E
JURA milk system cleaner is available from
specialized dealers.
E
To clean the milk system, use the container
supplied.
Precondition:
The ‘Cleaning the milk system’ (
6
)
symbol is displayed.
T
Press the
‘ P ’
button for
approximately
2 seconds
to enter programming mode.
T
Press the
‘Maintenance status’
button.
T
Press the
‘Clean the milk system’
button.
‘Clean the milk system’
T
Press the
‘Start’
button.
T
Press the
‘Next’
button.
‘Milk system cleaner’
T
Remove the milk pipe from the milk
container or milk cooler.
T
Add milk system cleaner to the front part of
the container up to the
bottom mark
(indicated by
6
).
6
T
Then fill with water up to the
upper mark.
T
Place the container under the dual spout.
T
Connect the milk pipe to the container.
E
To connect the milk pipe to the container
correctly, the pipe must be fitted with a
connector.
T
Press the
‘Next’
button.
‘Milk system is being cleaned’
, the dual
spout and the milk pipe are cleaned.
‘Fresh water’
T
Rinse the container thoroughly and fill the
front part with fresh water up to the
upper
mark.
T
Place it under the dual spout and reconnect
the milk pipe with the container.
T
Press the
‘Next’
button.
‘Milk system is being cleaned’
, the dual
spout and the pipe are rinsed with fresh
water.
The operation stops automatically. Your ENA
is once more ready for use.
