Jupiter ThermoMaster, Operating Instructions Manual

Page: 14 / 44

Operating Instructions ThermoMaster
14 Subject to technical changes without notice; no responsibility is accepted for the accuracy of this information.
Control panel
The ThermoMaster is operated via the control panel B .
P
Q
R
S T
U
V
P Power indicator
Q ON/OFF button
R
PULSE button
S SPEED controller (speed setting)
T
TEMP controller (temperature setting)
U TIMER controller (time setting)
V LCD display
Power indicator
• Lights red when the appliance is plugged into the mains.
• Lights blue during processing.
ON/OFF button
CAUTION Rotating parts can cause injury!
• Never put your hand into the appliance when the motor
is running.
• Press the ON/OFF button to start or stop processing.
PULSE button
CAUTION Risk of injury from hot splashing food-
stuffs and hot steam!
• At high speeds and in PULSE mode, always ensure that
the measuring cup is in place and firmly pressed down
onto the jug lid.
NOTE
Incorrect use can cause damage!
• The PULSE function to increase the speed may not be
used in conjunction with the mixing blade.
• Pressing the PULSE button increases the speed of the
blades temporarily in order to better mix or chop the
ingredients.
• Only ever hold the button for a brief period, approx. 3 to
4 seconds (if required, press briefly multiple times).
• When the PULSE function is active, this is shown on the
LCD display.
SPEED controller (speed setting)
• You can use this speed controller to set the speed of the
blades in increments of 1 - 10.
• The speed level set is shown on the LCD display.
Info: The motor is actuated by the controller electronics at
2-second intervals. The appliance will make an unfamiliar
noise at first, but this is completely normal.
TEMP controller (temperature setting)
CAUTION Risk of injury from the jug wall becom-
ing hot, from hot splashing foodstuffs
and hot steam!
• At cooking temperatures above 60 °C, foodstuffs that
spit or splash out, and any contact with the walls of the
jug can lead to burns.
• With this rotary controller you can set the cooking tem-
perature in 10 stages of 10 °C increments between
37 - 130 °C.
• The temperature set is shown on the LCD display.
• The temperature can be adjusted at any time using this
controller.
• When the cooking temperature has been reached, this
will be indicated on the LCD display and via an acoustic
tone.
TIMER controller (time setting)
• Use this rotary controller to set the processing time:
- From 0 - 60 seconds, precise to the second.
- From 1 - 60 minutes, in 30-second increments.
• The processing time set/the time remaining is shown on
the LCD display.
• The processing time can be adjusted at any time using
this controller.
• An acoustic signal indicates that the processing time
has ended.