°C
INFO
LIMITS
FUNCTIONAL TEST
SERVICE MENU HEATING
IDEAS
°C
6720813046-55.1TD
6720813046-58.1TD
6720813046-56.1TD
6720813052 (2016/10)
Cerapur GC9000iW
ÿ To switch off manual mode/emergency mode, press the c button
With the chimney sweep mode, the device can be switched to heating mode to
carry out measurements.
Display
to press.
– Measured water pressure of the device [bar]
ÿ Set the target temperature using the arrow h or g button .
ON / OFF switch on-off.
Fig. 34 Chimney sweep operation menu
Figure 35 Emergency operation menu
8.4.1 Infomenü
ÿ Simultaneously press the * and ( buttons for 3 seconds to open the settings
menu.
0.9 BAR Current operating pressure.
The chimney sweep operation now remains active for 30 minutes at 100%
heat output.
Data about the status of the device can be read out in the info menu. Proceed
as follows:
without heat demand by a temperature controller.
24 | service
ÿ Carry out the desired measurement.
ÿ Use the b button to select the appropriate values.
above:
ÿ Activation of emergency mode by pressing button c for
– Measured boiler temperature [°C]
ÿ To switch off the chimney sweep mode, press the c button.
8 seconds.
designation
Figure 36 Settings menu
– Operation or fault code
Setting the temperature.
8.3.1 Manual operation/emergency operation
ÿ Ensure that the device can dissipate its heat.
Device settings can be read out and changed via the settings menu.
40°C
If there is no fault or maintenance request, the display goes to sleep after 2
minutes. ÿ To exit idle status, press the b button .
ÿ Activate the chimney sweep mode by pressing the c button for 5 seconds.
After a few minutes of inactivity, the menu will automatically
close and the home screen will appear.
The device may only be operated manually for a few days.
Manual operation is also emergency operation
Tab. 17 Settings menu
ÿ Set the heat output (in %) using the arrow h or g button .
Hot water operation is not possible during chimney sweep
mode. The chimney sweep mode is automatically switched
off after 30 minutes. Settings that have been changed during
the chimney sweep operation are then cancelled.
ÿ Navigate through the menu with the h and g arrow keys .
ÿ Use the h and g arrow keys to navigate through the menu with Info
In manual operation, the device remains in operation with the
set boiler output.
8.4 Settings menu
8.5 Idle state of the display
8.3
chimney sweep operation
EMERGENCY OPERATION
BOILER TEMP.
MAX.100%
A
SCHORNSTEINFEGER
TARGET TEMP.
PERFOMANCE
BOILER TEMP.
70°C
60
60
Machine Translated by Google
Summary of Contents for Cerapur 9000i
Page 41: ...6720813052 2016 10 Cerapur GC9000iW 41 notes Machine Translated by Google...
Page 42: ...6720813052 2016 10 Cerapur GC9000iW 42 notes Machine Translated by Google...
Page 43: ...Cerapur GC9000iW 6720813052 2016 10 43 notes Machine Translated by Google...
Page 45: ...Machine Translated by Google...
