Juniper TX MATRIX, Hardware Manual, Page: 377 / 396

APPENDIX E
Cable and Wire Specifications and Pinouts
for the TX Matrix Router
• TX Matrix Management Port Cable Specifications on page 345
• RJ-45 Connector Pinouts for the TX Matrix Management ETHERNET Port on page 346
•
DB-9 Connector Pinouts for the TX Matrix Management AUXILIARY and CONSOLE
Ports on page 346
• TX Matrix Alarm Relay Contract Wire Specifications on page 347
TX Matrix Management Port Cable Specifications
For management and service operations, you connect the Routing Engine to an external
console or management network through ports on the corresponding TX-CIP.
Table 39 on page 345 lists the specifications for the cables that connect to management
ports.
Table 39: Cable Specifications for Routing Engine Management Interfaces
TX Matrix
Router
Receptacle
Maximum
Length Cable/Wire
Supplied Cable
Specification
Port
DB-9 male 6 ft (1.83 m) One 6-ft
(1.83-m) length
with DB-9/DB-9
connectors RS-232
(EIA-232) serial
cable Management
console or
auxiliary
interface
RJ-45
autosensing 328 ft (100 m) One 15-ft
(4.57-m) length
with
RJ-45/RJ-45
connectors Category 5 cable
or equivalent
suitable for
100Base-T
operation Management
Ethernet
interface
Related
Documentation
TX Matrix Connector Interface Panel (TX-CIP) Overview on page 38
•
•
RJ-45 Connector Pinouts for the TX Matrix Management ETHERNET Port on page 346
•
DB-9 Connector Pinouts for the TX Matrix Management AUXILIARY and CONSOLE
Ports on page 346
345 Copyright © 2010, Juniper Networks, Inc.