Juniper SSR120 Hardware Manual Download Page 35

Page: 35 / 87

Figure 13: Replacing the SIM Card Slot Cover

Connect SSR120 to Power

IN THIS SECTION

Connect Earth Ground to SSR120 | 35

Connect Power to SSR120 | 37

Power Off the SSR120 | 37

Connect Earth Ground to SSR120

To meet safety and electromagnetic interference (EMI) requirements and to ensure proper operation, you

must connect the chassis to earth ground before you connect it to power.

NOTE:

A ground connection to the protective earthing terminal is not required for an AC-powered

appliance. The AC power cords provide adequate grounding when you connect the power supply

in the appliance to a grounded AC power outlet by using the AC power cord appropriate for

your geographical location.

If an external ground connection is required, ensure that a licensed electrician has attached an

appropriate grounding lug to the grounding cable you supply. Using a grounding cable with an

incorrectly attached lug can damage the appliance.

Summary of Contents for SSR120
























































































Search results

Summary of Contents for SSR120

Reviews:

Related manuals for SSR120

Brands by name

Popular brands

Juniper SSR120, Hardware Manual

Search results

Summary of Contents for SSR120

Reviews:

Related manuals for SSR120

Brands by name

Popular brands