b. Select External for Type.
c. Assign _corp_ as the Tenant.
4. Scroll down to Interface Addresses and select ADD.
a. Enter the address 192.168.64.1.
b. Give the network interface a Prefix of 24.
Create a Service Route
1. Return to the Router level (up four levels).
2. Scroll down to Service Routes and select ADD.
a. Name the Service Route _internet-route_ and select ADD.
b. Select internet as the Service Name.
c. Under Service Route Type, select Service Agent.
3. Scroll down to Next Hop and select ADD.
a. Select _node1_ as the Node.
b. Select _wan1_ for the Network Interface.
c. Select Save.
4. Return to the Authority level (up three levels).
a. Scroll down to Services, and select _internet_.
b. Scroll down to security Policies and select _internal_.
Verify and Commit the Configuration
1. In the Routers list, select the _dallasbr2_ SSR appliance.
2. Return to the Authority level (up one level) and click on the Authority tile.
3. Verify that there is a configured Conductor Address.
4. Select VALIDATE. When the validation passes, select COMMIT.
42
Summary of Contents for SSR120
