Table 31: Port Settings for Connecting to the CLI at User End
Value
Port Setting
9600
Bits per second
8
Data bits
None
Parity
1
Stop bits
None
Flow control
5.
In the HyperTerminal window, enter
AT
.
For more information on the AT commands, see the following topics:
•
Initial Configuration for Security Devices
•
Monitoring and Troubleshooting for Security Devices
An
OK
response verifies that the modem can communicate successfully with the
COM
port on the PC or laptop.
6.
Dial the modem that is connected to the console port on the services gateway by
entering
ATDT
remote-modem-number
. For example, if the number of the modem
connected to the console port on the services gateway is
0013033033030
, enter
ATDT
0013033033030
.
The services gateway login prompt appears.
7.
Log in as the user
root
. No password is required at initial connection, but you must
assign a root password before committing any configuration settings.
Related
Documentation
•
Configuring the Modem at the SRX220 Services Gateway End on page 98
•
Connecting the Modem to the Console Port on the SRX220 Services Gateway on
page 70
•
SRX220 Services Gateway Software Configuration Overview on page 77
71
Copyright © 2016, Juniper Networks, Inc.
Chapter 14: Connecting the SRX220 Services Gateway to External Devices
