RJ-45 Connector Pinouts for the SRX110 Services Gateway Ethernet Port
Figure 10 on page 42
shows the RJ-45 cable connector pinouts for Ethernet ports.
Figure 10: Ethernet Cable Connector (RJ-45)
Table 23 on page 42
describes the RJ-45 connector pinouts for the Ethernet port for
10/100 Mbps.
Table 23: RJ-45 Connector Pinouts for the Services Gateway Ethernet
Port (10/100 Mbps)
Signal
Pin
TX+
1
TX-
2
RX+
3
Termination network
4
Termination network
5
RX-
6
Termination network
7
Termination network
8
Table 24 on page 42
describes the RJ-45 connector pinouts for the Ethernet port for 1
Gbps (1000 Mbps).
Table 24: RJ-45 Connector Pinouts for the Services Gateway Ethernet
Port (1 Gbps)
Signal
Pin
BI_DA+
1
BI_DA-
2
BI_DB+
3
BI_DC+
4
BI_DC-
5
Copyright © 2015, Juniper Networks, Inc.
42
SRX110 Services Gateway Hardware Guide for H2 Model Numbers
