Juniper SRX100, Hardware Manual

Page: 128 / 154

Electrical Safety Guidelines and Warnings
In Case of Electrical Accident
If an electrical accident results in an injury, take the following actions in this order:
1.
Use caution. Be aware of potentially hazardous conditions that could cause further
injury.
2.
Disconnect power from the services gateway.
3.
If possible, send another person to get medical aid. Otherwise, assess the
condition of the victim, then call for help.
General Electrical Safety Guidelines and Warnings
■
Install the services gateway in compliance with the following local, national, or
international electrical codes:
■
United States—National Fire Protection Association (NFPA 70), United States
National Electrical Code
■
Canada—Canadian Electrical Code, Part 1, CSA C22.1
■
Other countries—International Electromechanical Commission (IEC) 60364,
Part 1 through Part 7
■
Evaluated to the TN power system
■
Locate the emergency power-off switch for the room in which you are working
so that if an electrical accident occurs, you can quickly turn off the power.
■
Do not work alone if potentially hazardous conditions exist anywhere in your
workspace.
■
Never assume that power is disconnected from a circuit. Always check the circuit
before starting to work.
■
Carefully look for possible hazards in your work area, such as moist floors,
ungrounded power extension cords, and missing safety grounds.
■
Operate the services gateway within marked electrical ratings and product usage
instructions.
■
For the services gateway and peripheral equipment to function safely and
correctly, use the cables and connectors specified for the attached peripheral
equipment, and make certain they are in good condition.
Related Topics
■
SRX100 Services Gateway Electrical and Power Requirements on page 23
■
SRX100 Services Gateway Maintenance and Operational Safety Guidelines and
Warnings on page 105
■
SRX100 Services Gateway Agency Approvals on page 111
■
Grounding the SRX100 Services Gateway on page 47
110 ■
SRX100 Services Gateway Electrical Safety Guidelines and Warnings
SRX100 Services Gateway Hardware Guide