•
The weight of a chassis varies by the configuration. A chassis spare is the lightest at 273 lb (123.8 kg) and the weight
goes up to 421 lb (191 kg) on the PTX10008-PREM3. Installing the PTX10008 router in a rack or cabinet requires either
a mechanical lift or three people to lift the router and another person to secure it to the rack. To prevent injury, keep
your back straight and lift with your legs, not your back.
•
If the rack or cabinet has stabilizing devices, install them in the rack before mounting or servicing the router in the rack
or cabinet.
•
Before installing or after removing an electrical component, always place it component-side up on a flat antistatic mat
or in an electrostatic bag.
•
Do not work on the router or connect or disconnect cables during electrical storms.
•
Before working on equipment that is connected to power lines, remove jewelry, including rings, necklaces, and watches.
Metal objects heat up when connected to power and ground and can cause serious burns or become welded to the
terminals.
CAUTION:
Do not place a copper transceiver in an access port directly above or below another copper
transceiver. Damage to the access ports will occur.
Power Cable Warning (Japanese)
The attached power cable is only for this product. Do not use this cable for another product. Contacting Juniper Networks
For technical support, see
https://www.juniper.net/support/requesting-support.html
.
g040300
Juniper Networks, the Juniper Networks logo, Juniper, and Junos are registered trademarks of Juniper Networks, Inc. in the
United States and other countries. All other trademarks, service marks, registered marks, or registered service marks are the
property of their respective owners. Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper
Networks reserves the right to change, modify, transfer, or otherwise revise this publication without notice. Copyright © 2020
Juniper Networks, Inc. All rights reserved. Rev. 02, December 2019.
45