Juniper MX2010 3D Quick Start Manual Download Page 12 | Manualshive

Page: 12 / 72

background image

Step 3: Install the Router

•

Unpack the Router on page 12

•

Remove Components on page 14

•

Install the router using one of the following procedures:

•

Install the Router Using a Pallet Jack with Attachment on page 19

•

Install the Router Using a Router Transport Kit on page 24

Unpack the Router

The router is shipped in a wooden crate. A wooden pallet forms the base of the crate.
The router chassis is bolted to this pallet. A large rack mount tray, pallet jack attachment,
EMI cover, and a cardboard accessory box are also included in the shipping crate.

Before removing the router from the shipping crate, you must remove all components
(see

“Remove Components” on page 14

).

Because of the router’s size and weight—up to 985 lb (446.79 kg) depending on
configuration—we strongly recommend that you install the router using a pallet jack with
pallet jack attachment.

Copyright © 2014, Juniper Networks, Inc.

12

MX2010 3D Universal Edge Router Quick Start

«
...
10
11
12
13
14
...
»

Summary of Contents for MX2010 3D









































































Reviews:

No comments

Related manuals for MX2010 3D

Brand: Kasda Pages: 42

DAP-2590 - AirPremier N Dual Band PoE Access...

Brand: D-Link Pages: 90

DWL-7200AP - AirPremier AG - Wireless Access...

Brand: D-Link Pages: 12

Brand: Nexxt Pages: 2

Brand: H3C Pages: 43

Brand: UniFi Pages: 4

Brand: NETGEAR Pages: 60

Brand: NETGEAR Pages: 2

Brand: EliteConnect Pages: 214

Wi-Fi Bubble SpitFire

Brand: NAUTITECH Pages: 22

Brand: Ubiquiti Pages: 28

Brand: Ubiquiti Pages: 32

Brand: Linksys Pages: 19

Brand: Linksys Pages: 34

EKI-6333AC-A Series

Brand: Advantech Pages: 42

Brand: Abocom Pages: 2

Brand: Link electronics Pages: 34

AirStation WHR3-G54

Brand: Buffalo Pages: 10

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands