Juniper LN1000-V, Hardware Manual

Page: 41 / 56

CHAPTER 8
LN1000–V Rear Transition Module
Overview
• LN1000–V Rear Transition Module Description on page 23
• LN1000–V Rear Transition Module Features on page 23
LN1000–V Rear Transition Module Description
The LN1000-V rear transition module is a fully compatible, carrier-grade VITA
46.10-compliant I/O rear transition module for the LN1000-V Mobile Secure Router. The
6 rack unit (6RU) form factor, single-slot rear transition module is fully compliant with
the PICMG 2.0 Revision 3.0 specification.
The LN1000-V rear transition module requires an VITA 46.0-compliant chassis with a
midplane that accommodates front and rear board installations. The primary purpose
of this module is to provide rear access connections to the LN1000-V router in a test or
repair environment.
LN1000–V Rear Transition Module Features
•
LN1000–V Rear Transition Module Backplane Connector on page 23
• LN1000–V Rear Transition Module Console Ports on page 24
• IPMI Shelf Manager on page 25
•
LN1000–V Rear Transition Module Ethernet Ports on page 25
•
LN1000–V Rear Transition Module Switch Settings on page 25
LN1000–V Rear Transition Module Backplane Connector
The connector on the LN1000-V rear transition module provides the ability to configure
the router. It also provides:
• Console port access
• IPMI signals
•
USB port access
•
Ethernet port access
23 Copyright © 2010, Juniper Networks, Inc.