Juniper JUNOSe 11.0.1, Release Note

Page: 13 / 124

Release Overview
„ 5
Release 11.0.1
Release Overview
These Release Notes cover Release 11.0.1 of the system software for the Juniper
Networks E Series Broadband Services Routers and contain the following sections:
„ Release Highlights on page 7
„
Early Field Trial Features on page 7
„ Unsupported Features on page 10
„ Release Software Protocols on page 11
„ SRC Software and SDX Software Compatibility Matrix on page 13
„
Known Behavior on page 13
„ Known Problems and Limitations on page 36
„ Resolved Known Problems on page 55
„ Errata on page 61
„
Appendix A, System Maximums , page 67
„ Appendix B, Module Name Cross-Reference Information , page 109
„ Appendix C, Transferring DSL Line Rate Information from an Access Node to SRC
Software
, on page 111
If the information in these Release Notes differs from the information found in the
published documentation set, follow these Release Notes .
Before You Start
These Release Notes include information about the changes between Releases
11.0.0 and 11.0.1. Before you use your new software, read these Release Notes in
their entirety, especially the section Known Problems and Limitations . You need the
following documentation to fully understand all the features available in Release
11.0.1:
„ These 11.0.1 Release Notes, which describe changes between Release 11.0.0
and Release 11.0.1
„ The 11.0.0 Release Notes , which describe features available in Release 11.0.0
„ The 11.0.x documentation set, which provides detailed information about
features available in Release 11.0.0