JUNOSe 11.0.1 Release Notes
114
Monitoring the Status of Transfer of Updated DSL Line Rate Parameters to the COPS Server
Monitoring the Status of Transfer of Updated DSL Line Rate Parameters to the
COPS Server
Purpose
Display whether the SRC client is enabled to retrieve updated DSL line rate details
from ANCP and send them to the SRC client with corresponding COPS messages.
The command output refers to the SRC client by its former name, SSC client.
Action
To display the status of transfer of updated line rate parameter details from the SRC
client to the COPS server.
The line highlighted in bold is the field added for this feature in the output of this
command. The added line specifies whether line rate parameters are sent to the
COPS server with the other COPS messages.
host1#
show sscc info
The SSC Client configured protocols : IP(v4), DHCP(v4), L2TP(LAC)
The SSC Client is currently unconnected
The SSC Client configured servers are:
Primary: 10.10.2.2:3
Secondary: 0.0.0.0:0
Tertiary: 0.0.0.0:0
Local Source: FastEthernet 0/0, Local Source Address: 10.13.5.61
The configured transport router is: default
The configured retry timer is (seconds): 90
The configured update-policy-request is: Enabled
The connection state is: NoConnection
SSC Client Statistics:
Policy Commands received 0
Policy Commands(List) 0
Policy Commands(Acct) 0
Bad Policy Cmds received 0
Error Policy Cmds received 0
Policy Reports sent 0
Connection Open requests 0
Connection Open completed 0
Connection Closed sent 0
Connection Closed remotely 0
Create Interfaces sent 0
Delete Interfaces sent 0
Active IP Interfaces 2
IP Interface Transitions 0
Synchronizes received 0
Synchronize Complete sent 0
Internal Errors 0
Communication Errors 0
Tokens Seen 0
Active Tokens 0
Token Transitions 0
Token Creates Sent 0
Token Deletes Sent 0
Active Addresses 0
Address Transitions 0
Create Addresses Sent 0
Delete Addresses Sent 0
Authentication Successes 0
Authentication Failures 0
