67
Appendix A
System Maximums
This appendix presents current system maximums for various E Series hardware
configurations. An E Series router does not simultaneously support all maximum
configurations.
For some entries, early field trial (EFT) values are presented in addition to
supported values. These values have not been fully qualified by Juniper Networks
and are mentioned only for field test purposes in this release. EFT values are
enclosed within parentheses with an EFT designation; for example, (96,000 EFT).
Modules referred to in the tables are identified by their physical label. For module
specifications, including their identifying labels, see
ERX Module Guide, Table 1,
Module Combinations
and
E120 and E320 Module Guide, Table 1, Modules and IOAs
.
System Maximums for ERX310,
ERX7xx, and ERX14xx
Section
General router values
General System Maximums on page 68
Physical layer values
Physical and Logical Density Maximums on page 69
Link layer values
Link Layer Maximums on page 72
Routing protocol and performance values
Routing Protocol Maximums on page 77
Policy and QoS values
Policy and QoS Maximums on page 81
Tunneling values
Tunneling Maximums on page 84
Subscriber management values
Subscriber Management Maximums on page 86
System Maximums for E120 and E320
Routers
Section
General router values
General System Maximums on page 89
Physical layer values
Physical and Logical Density Maximums on page 90
Link layer values
Link Layer Maximums on page 92
Routing protocol and performance values
Routing Protocol Maximums on page 98
Policy and QoS values
Policy and QoS Maximums on page 101
Tunneling values
Tunneling Maximums on page 105
Subscriber management values
Subscriber Management Maximums on page 107
