JUNOSe 10.3.1 Release Notes
8
Unsupported Features
host1(config)#
no ip dhcp-local limit pos
To display the maximum number of IP address leases available for POS access
interfaces, use the existing
show ip dhcp-local limits
command. For example:
host1#
show ip dhcp-local limits
*****************************************
DHCP Local Server Address Limits
ATM Limit - 48000
VLAN Limit - 48000
POS Limit - 1000
Ethernet Limit - 48000
SDX Software and SRC Software
Transfer of Calling Station ID to PDP
JUNOSe Software now supports sending of the calling station ID to the Policy
Decision Point (PDP) for a virtual router. To enable this, use the
sscc option
send-calling-station-id
command in Global Configuration mode.
The following command has been modified in this release by the addition of
the
send-calling-station-ID
keyword:
The output of the following command has been modified in this release:
This feature is limited in this release to early field trial purposes only.
Unified ISSU
Service Manager Support for Unified ISSU
Service Manager support for unified ISSU is limited in this release to early field
trial purposes only.
Unsupported Features
The JUNOSe Release 10.3.x documentation set describes some features that are
present in the code but that have not yet been fully qualified by Juniper Networks.
If you use any of these features before they have been fully qualified, it is your
responsibility to ensure that the feature operates correctly in your targeted
configuration.
The following features are present but unsupported in this release.
E120 Router and E320 Router
The ES2 10G LM and ES2 10G Uplink LM do not support layer 2 statistics for
VLANs.
sscc option
show sscc option
