Release Overview
5
Release 10.3.1
Known Behavior on page 12
Known Problems and Limitations on page 34
Resolved Known Problems on page 52
Errata on page 61
Appendix A, System Maximums
, on page 67
Appendix B, Transferring DSL Line Rate Information from an Access Node to SRC
Software
, on page 109
If the information in these
Release Notes
differs from the information found in the
published documentation set, follow these
Release Notes
.
Before You Start
These
Release Notes
include information about the changes between Releases
10.3.0 and 10.3.1. Before you use your new software, read these
Release Notes
in
their entirety, especially the section
Known Problems and Limitations
. You need the
following documentation to fully understand all the features available in Release
10.3.1:
These 10.3.1 Release Notes, which describe changes between Release 10.3.0
and Release 10.3.1
The 10.3.0 Release Notes, which describe features available in Release 10.3.0.
The 10.3.x documentation set, which provides detailed information about
features available in Release 10.3.0
The 10.3.x documentation set consists of several manuals and is available only in
electronic format. You can print your own documentation using the PDF and HTML
formats available at the Juniper Networks Technical Documentation Web site at
www.juniper.net/techpubs. Refer to the following table to help you decide which
document to use.
Task
Document
Install the router
ERX Hardware Guide
E120 and E320 Hardware Guide
Learn about modules
ERX Module Guide
ERX End-of-Life Module Guide
E120 and E320 Module Guide
Get up and running quickly
E Series Installation Quick Start
poster or
ERX Quick Start
Guide
E120 and E320 Quick Start Guide
Configure the router
JUNOSe System Basics Configuration Guide
Configure physical layer interfaces
JUNOSe Physical Layer Configuration Guide
Configure link layer interfaces
JUNOSe Link Layer Configuration Guide
