Juniper Junos Space JA1500, Hardware Manual

Page: 146 / 210

11.
Grasp the handle of the power supply module and pull firmly to slide the power supply
module halfway out of the chassis.
12.
Place one hand under the power supply module to support it and slide it completely
out of the appliance. Take care not to touch power supply components, pins, leads,
or solder connections.
13.
Place the power supply module in the antistatic bag or on the antistatic mat placed
on a flat, stable surface.
Installing a DC Power Supply Module
To install a DC power supply module, do the following:
1.
(Optional) Attach an electrostatic discharge (ESD) grounding strap to your bare wrist,
and connect the strap to an external ESD point.
2.
Taking care not to touch power supply pins, leads, or solder connections, remove the
replacement power supply module from the bag.
3.
Using both hands, slide the replacement power supply module straight into the chassis,
as shown in
Figure 18 on page 132 , until the power supply is fully seated in the chassis
slot and the ejector lever locks.
Figure 18: Installing a DC Power Supply Module
1— Power supply ejector lever
4.
Connect the DC source power to the appliance. For more information, see the
“Connecting DC Power to the Junos Space Appliance” on page 41 topic.
Related
Documentation
DC Power Supply in Junos Space Appliances on page 17
•
•
Field-Replaceable Units on the JA2500 Junos Space Appliance on page 13
•
Replacing the DC Power Supply Cable on a Junos Space Appliance on page 128
Copyright © 2018, Juniper Networks, Inc. 132
JA2500 Junos Space Appliance Hardware Guide