Juniper Junos Space JA1500, Hardware Manual

Page: 142 / 210

Figure 16: Installing the AC Power Supply Module
1— Power supply ejector lever
5.
Connect the AC power cord to the power supply module. For more information, see
the
“Connecting AC Power to the Junos Space Appliance” on page 39 topic.
6.
If the appliance is not powered on, power on the appliance by pressing the switch on
the rear panel, next to the power supply module.
The Junos Space Appliance starts powering on when you supply power to the power
supply module. If the power supply module is correctly installed and functioning
normally, the LED on the power supply module displays green when the power supply
module is powering the appliance, and amber when the power supply module is in
standby mode (not powering the appliance).
Related
Documentation
AC Power Cord Specifications for Junos Space Appliances on page 14
•
•
AC Power Supply in Junos Space Appliances on page 15
•
Field-Replaceable Units on the JA2500 Junos Space Appliance on page 13
Replacing the DC Power Supply Cable on a Junos Space Appliance
Ensure that you have the following parts and tools available to remove the power supply
cable from the appliance chassis:
• (Optional) ESD grounding strap
• Phillips (+) screwdriver, number 2
•
An antistatic bag or an antistatic mat
NOTE: If only one power supply module is installed in your appliance, you
must power off the appliance before removing the power supply cable.
Copyright © 2018, Juniper Networks, Inc. 128
JA2500 Junos Space Appliance Hardware Guide