3.
Pull the lower end of the ejector lever away from the CFPC faceplate to unseat the
CFPC.
4.
Continue to pull the lever toward you and slide the CFPC straight out of the card cage
halfway.
5.
Place one hand around the front of the CFPC and the other hand under it to support
it. Slide the CFPC completely out of the chassis, and place it on the antistatic mat or
in the electrostatic bag.
CAUTION:
When the CFPC is out of the chassis, do not hold it by the ejector
handle, bus bars, or edge connectors. They cannot support its weight.
Place each individual CFPC in an individual electrostatic bag or on its own
antistatic mat on a flat, stable surface.
Figure 33: Removing a CFPC Before Installing the M120 Router
Related
Documentation
M120 Router Chassis Description on page 6
•
•
M120 Router Physical Specifications on page 225
•
M120 Chassis Lifting Guidelines on page 195
•
General Safety Warnings for M Series, MX Series, and T Series Routers on page 190
Copyright © 2010, Juniper Networks, Inc.
68
M120 Multiservice Edge Router Hardware Guide
All manuals and user guides at all-guides.com
all-guides.com