Juniper JSA3800, Hardware Manual, Page: 66 / 92

•
Before installing JSA3800, read the guidelines in “General Safety Guidelines and
Warnings” on page 59 .
• Before lifting or moving the JSA3800 appliance, disconnect all external cables.
•
As when lifting any heavy object, lift most of the weight with your legs rather than your
back. Keep your knees bent and your back relatively straight and avoid twisting your
body as you lift. Balance the load evenly and be sure that your footing is solid.
Related
Documentation
Ramp Warning on page 66
•
•
Installation Instructions Warning on page 65
•
Rack-Mounting and Cabinet-Mounting Warnings on page 66
•
Grounded Equipment Warning on page 70
•
Maintenance and Operational Safety Guidelines and Warnings on page 74
Ramp Warning
WARNING: When installing the device, do not use a ramp inclined at more
than 10 degrees.
Waarschuwing Gebruik een oprijplaat niet onder een hoek van meer dan 10
graden.
Varoitus Älä käytä sellaista kaltevaa pintaa, jonka kaltevuus ylittää 10 astetta.
Attention Ne pas utiliser une rampe dont l'inclinaison est supérieure à 10
degrés.
Warnung Keine Rampen mit einer Neigung von mehr als 10 Grad verwenden.
Avvertenza Non usare una rampa con pendenza superiore a 10 gradi.
Advarsel Bruk aldri en rampe som heller mer enn 10 grader.
Aviso Não utilize uma rampa com uma inclinação superior a 10 graus.
¡Atención! No usar una rampa inclinada más de 10 grados
Varning! Använd inte ramp med en lutning på mer än 10 grader.
Rack-Mounting and Cabinet-Mounting Warnings
Ensure that the rack or cabinet in which the device is installed is evenly and securely
supported. Uneven mechanical loading could lead to a hazardous condition.
Copyright © 2019, Juniper Networks, Inc. 66
Juniper Secure Analytics 3800 Hardware Guide