Juniper JSA3800, Hardware Manual, Page: 37 / 92

Figure 10: Installing the JSA3800 Appliance Front-Rear Mounting Flush in a Four-Post
Rack
5.
(Optional) Insert and tighten the thumbscrews that secure the front of the server to
the rack.
See Also Overview of Installing the JSA3800 Appliance in a Rack on page 31
•
•
Tools and Parts Required for Installing the JSA3800 Appliance on page 31
•
Mid-Mounting the JSA3800 Appliance in a Two-Post Rack on page 37
Mid-Mounting the JSA3800 Appliance in a Two-Post Rack
This option is suitable for a two-post equipment rack. It allows the appliance to be
mid-mounted so that there is even clearance at the front and rear of the rack.
To mount the appliance using this option:
1.
Determine how far the server will extend out from the front of the rack. The chassis
should be positioned to balance the weight between the front and back.
2.
Secure four brackets to the rack posts at the desired position. Secure two brackets
to the front rack posts and attach two brackets to the rear rack posts as shown in
Figure 11 on page 38 .
37 Copyright © 2019, Juniper Networks, Inc.
Chapter 3: Initial Installation and Configuration