Juniper JSA3800, Hardware Manual, Page: 47 / 92

<IP Address>
is the IP address of the JSA system.
The default values are:
Username:
admin
Password: <root password>
<root password> is the new root password you set during the installation process.
3.
Click Login To JSA .
The JSA interface appears. You are now ready to start tuning JSA and high availability
(HA) settings. For more information, see the
Juniper Secure Analytics Administration
Guide .
NOTE: You will need a permanent license for the JSA appliance to upgrade
to a higher version. If you have a temporary license, the upgrade will fail; run
the installer again to upgrade to a higher version.
See Also Configuring the Basic Settings on the JSA3800 Appliance on page 44
•
•
JSA3800 Appliance Physical Specifications on page 26
•
Connecting the JSA3800 Appliance to a Management Device on page 43
Related
Documentation
•
JSA3800 Installation Overview on page 31
•
Installing the JSA3800 in a Rack on page 32
•
Connecting the JSA3800 Appliance to a Management Device on page 43
47 Copyright © 2019, Juniper Networks, Inc.
Chapter 3: Initial Installation and Configuration