Juniper JATP400, Hardware Manual

Page: 25 / 113

General Site Installation Guidelines for the JATP400 Appliance
The following precautions can help you plan an acceptable operating environment for your JATP400
appliance and avoid equipment failures caused by environmental factors:
• For the cooling system to function properly, the airflow around the chassis must be unrestricted.
Allow sufficient clearance between the front and back of the chassis and adjacent equipment. Ensure
that there is adequate circulation in the installation location.
• Follow the electrostatic discharge (ESD) procedures to avoid damaging the equipment. Static
discharge can cause either components to fail, completely or intermittently over time.
NOTE: Install the appliance only in restricted areas, such as dedicated equipment rooms and
equipment closets, in accordance with Articles 110–16, 110–17, and 110–18 of the National
Electrical Code, ANSI/NFPA 70.
JATP400 Appliance Physical Specifications
Table 10 on page 18 lists the hardware specifications for the JATP400 appliance.
Table 10: JATP400 Appliance Physical Specifications
Specification JATP400
Dimensions (H x W x D) 1.7 in. x 17.2 in. x 25.6 in. (43 x 437 x 650 mm)
Weight 36 lb (16.33 kg)
Fans Five 40 x 40 x 56 mm 13K - 11K RPM, counter-rotating fans
The air flow direction is front to rear.
18