• Two rear-mounting brackets (provided in the accessory box shipped with the switch)
• Eight screws to secure the chassis to the rack (not provided)
• Cover panels for power supply slots
To mount the switch on a 19-in. rack:
1.
Place the switch on a flat, stable surface.
2.
Align the front-mounting brackets along the front panel of the switch chassis (see
Figure 1
).
Figure 23: Attaching the Front-Mounting Brackets to the Switch Chassis
3.
Align the bottom holes in the front-mounting brackets with the holes on the side panels of the
switch chassis.
4.
Insert mounting screws into the aligned holes. Tighten the screws by using the
Phillips (+) screwdriver, number 2.
5.
Ensure that the other holes in the front-mounting brackets are aligned with the holes in the side
panels. Insert a screw in each hole and tighten the screws by using the Phillips (+) screwdriver,
number 2.
6.
Have one person grasp both sides of the switch, lift the switch, and position it in the rack, aligning
the front-mounting bracket holes with the threaded holes in the rack posts. Align the bottom hole
in both the mounting brackets with a hole in each rack post, making sure the chassis is level.
75